How To Configure Text to Speech Setting Samsung Galaxy S20

How To Configure Text to Speech Setting Samsung Galaxy S20

Samsung recently revealed a range of new Galaxy Phones for the year 2020. Among those to steal the show were the Galaxy Z Slip and the Galaxy S20 Ultra.

The Galaxy S20 will have three variants: the 6.2-inch Galaxy S20, the 6.7-inch Galaxy S20 plus and the 6.9-inch Galaxy S20 Ultra. The prices of these phones start at $1000, $1200 and $1400 respectably. Of the three variants, the S20 Ultra has the most advanced camera setup. The difference between the three variants respectively are:

The Samsung Galaxy S20:

This is the most basic S20 model in the lineup. It will come with a 6.2 inch OLED display. The resolution of this smartphone is Quad HD. The three cameras on the back will be of 12MP+64MP+12MP and the camera in the front will be of 10MP. It will run with an Exynos 990 processor chip. The RAM of the phone will be either 8GB or 12GB, depending on the variant which you are purchasing. It will come with an internal storage of 128GB. The battery will be 4000 mAh which is considerably good. It is rated IP68 water-resistant. There will be an optional 5G variant available as well. The phone will start from a range of $1,349.

The Samsung Galaxy S20+:

This is a variant which is a grade above the base model S20. It will come with a 6.7 inch OLED display. The resolution again will be Quad HD. There is no difference in the back and front cameras except that there will be an added ToF Feature on the back camera. Again, it will run on an Exynos 990 processor. The RAM variant will depend on you whether you purchase the 8GB or 12GB variant. The internal storage will come in two options of 128GB and 512GB. There will be an increased battery size of 4500 mAh. The phone will be IP68 water resistant naturally. A 5G model is again an option that you have to take whether you want to purchase that one or not. It will start at $1,499.

The Samsung Galaxy S20 Ultra:

This is the best and most powerful variant in the series of S20. It will come with a 6.9 inch OLED display. The resolution will be the same – Quad HD. But there is a huge difference in the back cameras. The back cameras will be 108MP+48MP+12MP+ToF. If you are wondering about the front camera, it will have a 40 MP camera. The phone will run on Exynos 990 processor only. There will be two RAM variants available for you to choose from – 12GB and 16GB. The internal storage again will come in two options – 128GB and 512GB. If you are thinking about the battery, the battery is again upgraded to 5000 mAh, which means your device will run for a long period than usual. The phone is IP68 water-resistant. It will be 5G only and it will start from a price of $1,999.

All of the three smartphones have some great features and that is why they are priced this high. It is hard to determine if paying almost $1,999 for a smartphone is worth it or not, but one thing is sure that the quality you will get will be high.

Instructions on How To Configure Text to Speech Setting Samsung Galaxy S20:

Set up:

If you are using text to speech in English, this language is already installed and available to use.

From the Home screen, swipe up on an empty spot to open the Apps tray.

Tap Settings > General management >Language and input > Text-to-speech.

Select the preferred TTS engine:

Samsung text-to-speech engine
Google Text-to-speech Engine

Next to the desired search engine, tap the Settings icon.

Tap Install voice data.

For the Samsung text-to-speech engine, the desired language may already be downloaded.

However, you have the option of downloading a higher quality version.

Next to the desired language, tap the Download icon.

Wait as the language downloads. It may take a few minutes.

Tap the Back key.

Tap Language to select the language.

TalkBack settings:

From the Home screen, swipe up on an empty spot to open the Apps tray.

Tap Settings > Accessibility > Screen reader >Voice assistant.

Tap the slider to turn on.

This enables your Accessibility settings.

You can also enable your Accessibility settings by pressing the Home key 3 times in quick succession.

Tap SETTINGS, then tap to adjust the following:

Text-to-speech
Verbosity
Shake for continuous reading
Speak passwords
Read caller ID aloud
Vibration feedback
Sound feedback
Focus on speech audio
Focus Indicator
Single-tap activation
Single-tap navigation bar
Quick menu
Manage custom labels
Keyboard shortcuts
Status bar information
Developer options

Text to speech settings:

From the Home screen, swipe up on an empty spot to open the Apps tray.

Tap Settings > General management > Language and input > Text-to-speech.

Move the Speech rate slider to adjust how fast the text will be spoken.

Tap the Settings icon next to the desired TTS engine (Samsung or Google). To tap the Settings icon, the TTS engine must be selected.

Tap Language to adjust the spoken language.

Turn on TalkBack:

From the home screen, swipe up on an empty spot to open the Apps tray.

Tap Settings > Accessibility > Screen reader.

Tap Voice assistant.

Tap the Voice Assistant slider to turn on.

Experiencing difficulties with your Device, check out ourHow Topage on how to resolve some of these issues.

Total
0
Shares
Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Post
How To Block Direct Spam Traffic in Google Analytics with Advanced Filters

How To Block Direct Spam Traffic in Google Analytics with Advanced Filters

Next Post
Apple Introduced 'Pay Later' Scheme With $1,000 Credit Limit

Apple Introduced ‘Pay Later’ Scheme With $1,000 Credit Limit

Related Posts